Overview of Wholesalers of Drilled Tail Wire

Overview of Wholesalers of Drilled Tail WireDrilled thread, like air, is an indispensable part of life. Drilled tail wire is widely used in electronic products, mechanical products, digital products, power equipment, electromechanical products, etc. Generally speaking, as long as there is industry on Earth, the function of silk will always be primary. 

Next, let's mainly learn about drill bit threads.Drill tail wire is a new invention in recent years, as its name suggests, the tail of drill tail wire is generally in the shape of a drill tail. Drilled tail wire is a type of wood wire mainly used for fixing colored steel tiles in steel structures, and can also be used for fixing thin plates in simple buildings. The tail of the drill tail thread is in the shape of a drill tail or pointed tail, without the need for auxiliary processing. It can be directly drilled, tapped, and locked on the set materials and basic materials, greatly saving construction time. 

Compared with ordinary thread, drill tail thread has higher toughness and maintenance ability, longer combination time, and will not loosen. It is easy to use and safely drill and tap in one go. Let's take a look at how to properly install stainless steel drill tail screws:1. The stainless steel drill tail wire requires a dedicated drill bit (recommended power of 600W).2. Adjust the electric drill locator to the appropriate position to ensure that the wire drill is in the correct position. 

Check the rotation speed of the drill bitUse 3.5 (6 #); 3.9 (7 #); 4.2 (8 #); 4.8 (10 #) 410 threads; Ensure that the drill bit speed is between 1800-2500 rpm;Use 5.5 (12 #); 6.3 (14 #) 410 threads; Ensure that the drill bit speed is between 1000-1800 rpm;Use 3.5 (6 #); 3.9 (7 #); 4.2 (8 #); 4.8 (10 #) 304 wire; Ensure that the drill bit speed is between 1500-2000 rpm;Use 5.5 (12 #); 6.3 (14 #) 410 threads; Ensure that the drill bit speed is between 1000-1500 rpm.3. Choose a suitable sleeve or cross screwdriver head to install on the electric drill, and then connect the wire.When installing, the wire and drill bit must be perpendicular to the surface of the stamped steel plate, and click the power switch to create a center point.5. Apply approximately 13 kilograms of force to the electric drill by hand, ensuring that the force is on the same vertical line as the center point.6. Turn on the power switch and do not stop halfway. After the thread reaches, immediately stop the drill bit (to prevent the drill bit from not reaching or excessive drilling).

Due to the essential difference between stainless steel and carbon steel, stainless steel has good ductility, and improper use can easily lead to the inability of wires to enter smoothly and weak bonding force. Therefore, when using stainless steel drill bits, attention should be paid to:1. Before use, confirm whether the mechanical properties of the product meet the usage requirements. For example, SUS316 and SUS304 material wires can only attack materials such as plastic steel, magnesium titanium alloy, aluminum alloy, industrial plastic, etc. For example, SUS410C material drill tail wires can not only attack these materials, but also attack stainless steel and various steel plates with a hardness of around HV300 degrees. (Steel plates below 18 millimeters)2. Choose different drilling tail wires according to the usage environment.3. According to the different thicknesses of materials, choose different models and specifications of drilling tail wires. For example, when attacking thicker materials, choose a longer drill thread.When attacking, keep the axis of the lock and the axis of the thread perpendicular to the locked object on the same straight line.